Low Relief Backscene Warehouse – Right

Railway Laser Lines – Laser Cut O Gauge Backscene Warehouse (Right)

Built in mind to help fill the backscene with something more interesting than just a printed photograph and to give some depth too.

This is the ‘right’ version and therefore finishes off any rows of the left version that you may have. These kits do NOT have any end brickwork, so please bear this in mind as they were never designed to be a stand-alone product.

The kit comes in many parts and is easy enough to build and you can fill the internal area too with a lift-off lid (no need to glue down unless desired). The warehouse also has two of the windows with small opening areas and these have their own small individual glass panes too!

• Skeleton Frame
• Front Engraved Brickwork with Seperate Engraved Brickwork Buttresses (Now Enhanced Brickwork)
• Corrugated Roof
• Two Small Opening Warehouse Windows
• Separate Lintels & Ledges
• Roof Truss Interior
• An Ideal Backscene Kit

Images show our (left) kit and are for illustration purposes only. When time allows, we will make up a (right) version and post photographs.

Product Code

RLL-715-BW-R

Dimensions

L:357mm x D:87mm x H:117 mm

Materials Used

MDF, Card, PETG

Assembly Required

Yes

Additional Parts Required (Not Included With Kit): Comes as a kit but some parts of the kit will require priming, painting and/or glueing. A sharp craft knife/zippy blade or similar will be required to remove pieces from part of the kit.
Other items required to assist: PVA Glue (or equivalent) Sandpaper, Primer Paint, Acrylic/Enamel Paint, Masking Tape, Paint Brushes

Advise: When priming/painting, do so in a well-ventilated area and use an appropriate mask. Some items are very fragile so handling with care is paramount.

NB: PLEASE NOTE – POSTAGE COSTS APPLY ONLY TO WITHIN THE UK

Instruction Kit Document

This kit comes with a parts list. There are no written instructions for this kit. There is a ‘How To Build’ Video link tab above to watch the video. The video shows us making the (left) kit but making this (right) kit works in the same way, just the front brickwork is slightly different

Get In Touch

If you are not sure about anything, then you can contact us via our contact form. We’re here to help.

Kit Version:-
V1.0 Introduction – 29th July 2026 (inc enhanced front brickwork as per our (left) kit upgrade.