RLL7526CP O Gauge 10x Concrete 6 Panel Fencing and Posts
£12.99 £9.75
Product Code: RLL-752-6CP
Dimensions: L 550mm x H 46mm
Materials Used; MDF
Assembly Required: Yes
Additional Parts Required (Not Included With Kit): Comes as a kit and parts will require either priming, painting and/or glueing. A sharp craft knife/zippy blade or similar will be required to remove pieces from part of the kit.
Other items required to assist: PVA Glue (or equivalent) Sandpaper/file, Primer Paint (optional), Acrylic/Enamel Paint, Masking Tape, Paint Brushes.
Advise: When priming/painting, do so in a well-ventilated area and use an appropriate mask. Some items are very fragile so handling with care is paramount.
PLEASE NOTE: ALL laser cut kits are made ‘to order’. PLEASE NOTE, AS FROM 1ST MAY – DELIVERY TIMES ARE NOW UP TO 28 DAYS, unless we have made any surplus kits, then they will be made readily available. Check below if we have any in stock ready to post out. We will do our best to delivery prior to the 28 days but cannot guarantee this so please do not order if you are unable to wait.
NB: PLEASE NOTE – POSTAGE COSTS APPLY ONLY TO WITHIN THE UK – USE OUR CONTACT FORM TO GET A QUOTE OUTSIDE OF THE UK
In stock (can be backordered)
A new product added to the Railway Laser Lines this month is the pack of 10x O Gauge 6 Panel Concrete Fencing along with 11 concrete posts that will give you a length of fencing around 550mm.
The panels have engraved lines horizontally on both sides to respresent singular concrete panels and 6 make up a block.
Simply use a sharp modelling knife/zippy blade or equivalent to cut the panels from the template. Do the same for the concrete posts and then slide the panels inside the posts and glue along the vertical lines using a very small amount of PVA glue using the dabbing method. Immediately wipe away any excess glue with a small brush. Hold each post in place with you finger/thumb to bond, then release and do the remaining ones. When it comes to joing the two panels together the centre post should be glued half one one side and half on the other to give that perfect join. Add some additional glue to the sides of the ends of each concrete panel. Allow to fully dry and paint and weather accordingly.
There is also a ‘How To….’ video should you wish to see how we did this product. Simply click on the’Video’ tab just above.
If you want to spice things up, you can simply cut away some panels to give that dilapidated look. Care should be taken when cutting these as not to damage them.
NB: Image currently shows the 3 panel version of this kit
| Weight | 150 kg |
|---|
Only logged in customers who have purchased this product may leave a review.
Related products
Reviews
There are no reviews yet.