Brick Column Support With Concrete Block Tops – Ideal For Our Iron Footbridge

O Gauge – Brick Column Supports with concrete block tops – ideal use with our Iron Footbridge Kit

Our laser enhanced engraved brickwork comes standard on our brick column support kit to give you that great looking brick finish. Simply glue the four sides together and add the 3 separate concrete block tops to complete this kit.

Prime the etched brickwork and blocks using a quality primer. Allow to dry thoroughly before paining in your desired colour/s.

These brickwork columns work with our laser cut standard and premium Iron Footbridge kit. However, they could be used elsewhere should you wish.

The 4 brick panels are held in the template by small tags (lines on template to show) that will require to be cut with a zippy blade/knife to release them from their template. NB: Our enhanced brickwork is fragile and should be handled with care to avoid any bricks coming away.
If using masking tape to hold the brickwork in place whilst drying, DO NOT USE normal masking tape as this may take off the surface layer of MDF and also pull the small bricks off. We recommend Tamiya low tack masking tape. Always pull masking tape off away and at an angle and if you see any bricks on the tape, either glue them back on or leave off to form the effect of broken bricks!

Instructions

There are no instructions with this kit as it is self explanitory.

Launch Date: 2nd August 25
Version: 1.0

Product Code

RLL-755-BC

Dimensions

(Approx) W:62mm; D:24mm; H:108mm

Assembly Required

Yes

Get In Touch

If you are not sure about anything, then you can contact us via our contact form. We’re here to help.

NB: PLEASE NOTE – POSTAGE COSTS APPLY ONLY TO WITHIN THE UK