OO Gauge Diesel Depot Shed – 2 Road – 4 Loco Through Road Option With Windows Both Sides

Railway Laser Lines – Laser Cut This is Railway Laser Lines’s second laser kit available on the market. It is a 2 road, 2 engine length through road OO gauge depot kit that is made from MDF, card and clear acetate.

The skeleton of the laser cut OO gauge diesel depot 2 Road Kit is made from MDF. So are the internals – the roof trusses, the door sides and top box along with the engraved depot doors. The outer layer of the depot kit is engraved brickwork to give that professional finish.

This 2 road diesel depot kit includes a base and we thoroughly recommend that it is used to get the maximum benefit from the kit and to square the framework. The skeleton framework interlocks for a nice fit and with the roof trusses and cross members give that extra support too. Once the base is done, it simply allows you to slide your OO gauge track in and will butt up close to the edge of the rail, hiding the sleepers. Once the centre pieces are added between the rails, it will give that overall flush finish and will look fantastic when it has all been painted in a concrete colour and weathered accordingly.

Video Instructions For This Kit

This kit currently only comes with written instructions. We have added the instructions on the product page as well so you can read them direct from your computer/ipad/mobile if preferred. At this moment in time, there is no video build for this kit.

Dave @ Dean Park built this diesel shed and did a 2 part video on his channel that is certainly worth watching how its made.

Product Code

RLL-633-2RS

Track Requirement

The base design has been made to use Peco Code 100 track

Dimensions

L600mm x W180mm x H 108 mm

Materials Used

MDF, Card, Acetate

Assembly Required

Yes

Additional Parts Required (Not Included With Kit): Comes as a kit but some parts of the kit will require priming, painting and/or glueing. A sharp craft knife or similar will be required to remove pieces from part of the kits.
Other items required to assist: PVA Glue, Super Glue (Optional) Sandpaper/Sanding Block, Small Flat File, Square, Masking Tape, Metal Ruler

Advise: When priming/painting, do so in a well-ventilated area and use an appropriate mask. Some items are very fragile so handling with care is paramount.

PLEASE NOTE: ALL laser cut kits are made ‘to order’. PLEASE NOTE, AS FROM 1ST MAY – DELIVERY TIMES ARE NOW UP TO 28 DAYS, unless we have made any surplus kits, then they will be made readily available. Check below if we have any in stock ready to post out. We will do our best to delivery prior to the 28 days but cannot guarantee this so please do not order if you are unable to wait.