RLL6546CP-TP OO Gauge 15x Concrete 6 Panel Fencing and Posts (Twin Pack)
£19.98 £15.99
Product Code: RLL-654-6CP-TP
Dimensions: L 950mm x H 26mm (post height)
Materials Used; MDF
Assembly Required: Yes
Additional Parts Required (Not Included With Kit): Comes as a kit and parts will require either priming, painting and/or glueing. A sharp craft knife/zippy blade or similar will be required to remove pieces from part of the kit.
Other items required to assist: PVA Glue (or equivalent) Sandpaper/file, Primer Paint (optional), Acrylic/Enamel Paint, Masking Tape, Paint Brushes.
Advise: When priming/painting, do so in a well-ventilated area and use an appropriate mask. Some items are very fragile so handling with care is paramount.
PLEASE NOTE: ALL laser cut kits are made ‘to order’ and current turn around time is 5-10 days, unless we have made any surplus kits, then they will be made readily available. Check below if we have any in stock ready to post out.
NB: PLEASE NOTE – POSTAGE COSTS APPLY ONLY TO WITHIN THE UK – USE OUR CONTACT FORM TO GET A QUOTE OUTSIDE OF THE UK
In stock (can be backordered)
This is the twin pack version of the RLL6546CP 15x OO Gauge 6 Panel Concrete Fencing Pack that will give you a length of fencing around 950mm
A new product added to the Railway Laser Lines is the pack of 15x OO Gauge 6 Panel Concrete sections (these ones are made from MDF, rather than card like our other OO gauge panels, along with 16 concrete posts that will give you a length of fencing around 475mm.
The panels have six engraved lines horizontally on both sides to respresent singular concrete panels and 5 panels make up each block.
Simply use a sharp modelling knife/zippy blade or equivalent to cut the panels from the template. Do the same for the concrete posts and then slide the panels inside the posts and glue along the vertical lines using a very small amount of PVA glue using the dabbing method. Immediately wipe away any excess glue with a small brush. Hold each post in place with you finger/thumb to bond, then release and do the remaining ones. When it comes to joing the two panels together the centre post should be glued half one one side and half on the other to give that perfect join. Add some additional glue to the sides of the ends of each concrete panel. Allow to fully dry. These posts require to be sunked into your baseboard and a 1mm drill piece is required, or simply cut this piece off and glue to the baseboard surface. Paint and weather accordingly if desired.
| Weight | 201 kg |
|---|
Only logged in customers who have purchased this product may leave a review.
Related products
Concrete Panels
Concrete Panels
Office and Out Buildings
RLL610TC Toton Fuel Line Store – Maintenance Office – OO Gauge Kit
Accessories
Reviews
There are no reviews yet.