RLL703DE Single Road Diesel Depot (Dead End)- O Gauge Kit

£164.99

Product Code: RLL-703-DE


Track Requirement: The base design has been made to use with Peco track.


Dimensions: L 590mm x W 230mm x H 165mm


Materials Used; MDF, Card


Assembly Required: Yes


Additional Parts Required (Not Included With Kit): Comes as a kit but some parts of the kit will require priming, painting and/or glueing. A sharp craft knife/zippy blade or similar will be required to remove pieces from part of the kit.
Other items required to assist: PVA Glue (or equivalent) Sandpaper, Primer Paint, Acrylic/Enamel Paint, Masking Tape, Paint Brushes. Track not included.


Advise: When priming/painting, do so in a well-ventilated area and use an appropriate mask. Some items are very fragile so handling with care is paramount.


PLEASE NOTE: ALL laser cut kits are made ‘to order’ and current turn around time is 10-14 days, unless we have made any surplus kits, then they will be made readily available. Check below if we have any in stock ready to post out.
****THERE IS A 10 PART VIDEO SERIES ON HOW TO BUILD THIS KIT – DETAILS WILL BE SENT TO PURCHASERS****

NB: PLEASE NOTE – POSTAGE COSTS APPLY ONLY TO WITHIN THE UK – USE OUR CONTACT FORM TO GET A QUOTE OUTSIDE OF THE UK


Available on back-order