RLL715BW Backscene Warehouse (Left) – O Gauge Kit
£39.95
Product Code: RLL-715-BW
Dimensions: L 368 mm x D 87 mm x H 117 mm
Materials Used; MDF, Card, PETG
Assembly Required: Yes
Additional Parts Required (Not Included With Kit): Comes as a kit but some parts of the kit will require priming, painting and/or glueing. A sharp craft knife/zippy blade or similar will be required to remove pieces from part of the kit.
Other items required to assist: PVA Glue (or equivalent) Sandpaper, Primer Paint, Acrylic/Enamel Paint, Masking Tape, Paint Brushes
Advise: When priming/painting, do so in a well-ventilated area and use an appropriate mask. Some items are very fragile so handling with care is paramount.
PLEASE NOTE: ALL laser cut kits are made ‘to order’. PLEASE NOTE, AS FROM 1ST MAY – DELIVERY TIMES ARE NOW UP TO 28 DAYS, unless we have made any surplus kits, then they will be made readily available. Check below if we have any in stock ready to post out. We will do our best to delivery prior to the 28 days but cannot guarantee this so please do not order if you are unable to wait.
NB: PLEASE NOTE – POSTAGE COSTS APPLY ONLY TO WITHIN THE UK – USE OUR CONTACT FORM TO GET A QUOTE OUTSIDE OF THE UK
Not in stock but available to order
Railway Laser Lines – Laser Cut O Gauge Backscene Warehouse (Left)
Built in mind to help fill the backscene with something more interesting than just a printed photograph and to give some depth too.
This is the ‘Left’ version and therefore, you can join as many as these up to each other as required, the brick buttresses following on from the previous and then end with a ‘right’ version (coming soon!) will complete the row of warehouses, or simply use the one and sandwich it in between other buildings or butt one end up against your side panel. These kits do NOT have any end brickwork, so please bear this in mind as they were never designed to be a stand-alone product.
The kit comes in many parts and is easy enough to build and you can fill the internal area too with a lift-off lid (no need to glue down unless desired). The warehouse also has two of the windows with small opening areas and these have their own small individual glass panes too!
- Skeleton Frame
- Front Engraved Brickwork with Seperate Engraved Brickwork Buttresses
- Corrugated Roof
- Two Small Opening Warehouse Windows
- Seperate Lintels & Ledges
- Roof Truss Interior
- An Ideal Backscene Kit
Instruction Kit Document
This kit comes with a parts list. There are no written instructions for this kit. We have done a 26 minute video on how to build this kit and the link will be sent to purchasers of this kit.
Get In Touch
If you are not sure about anything, then you can contact us by either ‘Live Chat’, or via our contact form. We’re here to help.
Kit Version:-
1.0 Introduction
| Weight | 250 kg |
|---|
Only logged in customers who have purchased this product may leave a review.
Related products
Reviews
There are no reviews yet.