Immingham Fuelling Shed

Laser Cut O Gauge Immingham Fuelling Shed – For Use With Peco Bullhead Track-

Immingham has played a major part in the maintenance of locomotives for many years and you could find in excess of 50 locomotives parked up at weekends back in the 80s/90s. Unfortunately, like many depots across the country, these were all closed and a similar fate lay ahead with Immingham. Today, the area is a former shadow of itself and it wasn’t until 2019 that DB Schenker started installing a new fuelling facility further down from where the depot was for locomotives that required fuelling before their next working. A 40ft single road refuelling shed was erected and the exterior was DB Schenker red, which certainly suited the shed as it complimented the livery of most DB locos.
Having a number of images for this shed and the use of tools from Google, we decided that this would make an ideal laser cut kit and this is a result of our work. It represents the actual shed well and allows you to use as is or to even use for a number of other purposes with a little adaption. The refuelling shed does have all the fuelling set up in a unit next to the shed but unfortunately we have been unable to source any images of this.
Our kit includes the fuelling grids, which are present on the actual shed. The grids do not run the full length of the shed.

The kit comes in many parts and is easy enough to build and there is a video that we have done that shows how we made this kit (OO version)

• For Peco Bullhead track ONLY (Not Included)
• Includes our popular Fuelling Grids (worth £16.95)
• Corrugated Roof
• H Beam Supports
• H Beam Roof Cross Members
• Side Cladding for internal and External viewing

Instruction Kit Document

This kit comes with a parts list. There are no written instructions for this kit. However, we have done a ‘How To….’ Video on making the OO gauge version. Click on the ‘video’ tab to see this video.
PLEASE READ THE VIDEO DESCRIPTION TO SEE THE CHANGES THAT THE O GAUGE KIT HAS.

Get In Touch

If you are not sure about anything, then you can contact us via our contact form. We’re here to help.
Image of Immingham Fuelling Shed courtesy of Craig Adamson

Product Code

RLL-716-IM

Dimensions (Approx)

L 280 mm x D 145 mm x H 118 mm

Materials Used

MDF, ModelBord

Assembly Required

Yes

Additional Parts Required (Not Included With Kit)

Comes as a kit but some parts of the kit will require priming, painting and/or gluing. A sharp craft knife/zippy blade or similar will be required to remove pieces from part of the kit.

PLEASE NOTE – MODELBORD REQUIRES PRIMING BEFORE PAINTING
Other items required to assist:Deluxe Materials Rocket Card Glue/Laser Cut Glue/Super-Phatic/Glue N Glaze are recommended glues (we used Rocket Card/Glue N Glaze on the demo) (or equivalent glues) Sandpaper, Primer Paint, Acrylic/Enamel Paint, Masking Tape (Tamiya), Paint Brushes

Advise: When priming/painting, do so in a well-ventilated area and use an appropriate mask. Some items are very fragile so handling with care is paramount.

PLEASE NOTE: ALL laser cut kits are made ‘to order’. DELIVERY TIMES MAY BE UP TO 28 DAYS, unless we have made any surplus kits, then they will be made readily available. Check below if we have any in stock ready to post out. We will do our best to delivery prior to the 28 days but cannot guarantee this so please do not order if you are unable to wait.

NB: PLEASE NOTE – POSTAGE COSTS APPLY ONLY TO WITHIN THE UK – USE OUR CONTACT FORM TO GET A QUOTE OUTSIDE OF THE UK