Backscene Diesel Depot – Right

Railway Laser Lines – Laser Cut O Gauge Backscene Diesel Depot Kit (Right)

Built in mind to help fill the backscene with something more interesting than just a printed photograph and to give some depth too.

This is the ‘right-side’ version and this can be fitted next to either the ‘inner’ or ‘left-side’ kits to make this as long as you wish.

The kit comes in many parts and is easy enough to build and we have done a ‘How To’ build video which we will email purchasers of the kit a link to.

• Skeleton Frame To Give Depth (approx 10mm – Extension kit available to increase this to allow a single road entrance)
• Front Engraved Brickwork with Additional Engraved Brickwork Buttress and end panel
• Side Depot Windows with Glazing
• Side Cladding To Give An Extra 3D Effect
• Gutter Strip
• An Ideal Backscene Kit

Product Code

RLL-720-BD

Dimensions

L 425 mm x D 10.5 mm x H 148 mm

Materials Used

MDF, Card, Mylar

Assembly Required

Yes

Additional Parts Required (Not Included With Kit): Comes as a kit but some parts of the kit will require priming, painting and/or glueing. A sharp craft knife/zippy blade or similar will be required to remove pieces from part of the kit.
Other items required to assist: PVA Glue (or equivalent) Sandpaper, Primer Paint, Acrylic/Enamel Paint, Masking Tape, Paint Brushes

Advise: When priming/painting, do so in a well-ventilated area and use an appropriate mask. Some items are very fragile so handling with care is paramount.

NB: PLEASE NOTE – POSTAGE COSTS APPLY ONLY TO WITHIN THE UK

Instruction Kit Document

This kit comes with a parts list. There are no written instructions for this kit. However, there is a video on how to build this kit. Simply click on the ‘Video’ tab to watch this video.

V1.0 – Launch Date – April 2021
V2.0 – Enhanced Brickwork – February 2025

Get In Touch

If you are not sure about anything, then you can contact us via our contact form. We’re here to help.