Depot Fuelling Grids (195mm or 226mm Lengths)

O Gauge – Fuelling Grids
Centre Grid and Optional Outer Extension Grids (Now in 195mm & 226mm Options)

Why not add some more detail to your diesel depot layout and in the form of these fuelling grid packs.
Available as a single centre section and as an outer extension pack to make up 195mm worth of fuelling grid. You can then add as many additional packs as required to make up the length that is required.
The centre section piece has 1300 grid holes in it, so these do take time to laser cut and therefore reflected in the cost of production.

Made from our ModelBord, these can be easily made up in a short period of time. The centre section piece has been designed so that it simply slots inbetween the sleepers on the Peco Bullhead track and can be glued in place if preferred. The outer extension pieces simply butt up against the side of the rail just above the chair and gives as close as finish to the rail as possible but also being slightly under the rail height. Again, these can be glued in place once done.
If you have ballast the track already where these grids will go then you may find that you will need to remove the ballast to allow fitting of these.

Please note – track is NOT included in this kit!

OPTIONS:-
Choose from:-
1x Single Centre Section (195mm)
1x Outer Extension Pack (195mm)
1x Single Centre Section + 1x Outer Extension Pack (195mm)

or available to order from 10th September 2026 only available as a pack and not separately, our new 226mm length fuelling grid.

1x Single Centre Section & Outer Extension (226mm)

Instruction Kit Documemnt

There is a ‘How To Build….’ video of this kit, so please click on the ‘Video’ tab to watch.

Get In Touch

If you are not sure about anything, then you can contact us via our contact form. We’re here to help.

As our ModelBord material is flexible, kits will be sent in a card-backed envelope with added card protection inside.

Product Code

RLL-743-FG

Track Requirement

Only fits Peco Bullhead track (Not Included)

Dimensions

Centre Section – L195mmmm x W26mm, Extension Pieces – L195mm x W13mm, New additional length grids – Centre Section & Outer Extension 226mm

Materials Used

ModelBord

Assembly Required

Yes

Additional Parts Required (Not Included With Kit)

Comes as a kit and requires glueing and painting. A sharp craft knife/zippy blade or similar will be required to remove pieces from part of the template.
Other items required to assist: Deluxe Materials Super Phatic (or equivalent), Paints

Advise

When painting, do so in a well-ventilated area and use an appropriate mask. Some items are very fragile so handling with care is paramount.

NB: PLEASE NOTE – POSTAGE COSTS APPLY ONLY TO WITHIN THE UK