Concrete 3 Panel Fencing and Posts – Twin Pack

This is the twin pack version of the RLL7513CP 10x O Gauge 3 Panel Concrete Fencing Pack that will give you a length of fencing around 1.1m.

The panels have engraved lines horizontally on both sides to represent singular concrete panels and 3 make up a block.

Simply use a sharp modelling knife/zippy blade or equivalent to cut the panels from the template. Do the same for the concrete posts and then slide the panels inside the posts and glue along the vertical lines using a very small amount of PVA glue using the dabbing method. Immediately wipe away any excess glue with a small brush. Hold each post in place with you finger/thumb to bond, then release and do the remaining ones. When it comes to joing the two panels together the centre post should be glued half one one side and half on the other to give that perfect join. Add some additional glue to the sides of the ends of each concrete panel. Allow to fully dry and paint and weather accordingly.

We have done a video on how we painted the O gauge panels. Simply click on the ‘video’ tab to watch.

If you want to spice things up, you can simply cut away some panels to give that dilapidated look. Care should be taken when cutting these as not to damage them.

NB: Image currently shows the 3 panel part painted version of this kit

Product Code

RLL-751-3CP

Dimensions

L 1100mm x H 46mm

Materials Used

MDF

Assembly Required

Yes

Additional Parts Required (Not Included With Kit): Comes as a kit and parts will require either priming, painting and/or glueing. A sharp craft knife/zippy blade or similar will be required to remove pieces from part of the kit.
Other items required to assist: PVA Glue (or equivalent) Sandpaper/file, Primer Paint (optional), Acrylic/Enamel Paint, Masking Tape, Paint Brushes.

Advise: When priming/painting, do so in a well-ventilated area and use an appropriate mask. Some items are very fragile so handling with care is paramount.

NB: PLEASE NOTE – POSTAGE COSTS APPLY ONLY TO WITHIN THE UK