Want to simply display your model or create a scene? Then the new diorama twin baseboard pack is ideal.
These display diorama basebaords have a slightly larger footprint than our standard 575mm x 375mm baseboards. You get an additional 25mm in width and although the base section has been reduced from 100mm to 50mm, it now gives you a big 360mm backscene, which will allow you to create a nice display, i.e tunnels at each end, or bridges, or even a raised area at the back, the list is endless and with the ‘Blind’ panel 126mm in width at the front, this gives a great starting place for tunnels and bridges to work from.
The twin pack baseboards when fitted together measure 1150mm in length, 400mm in width and has a front and side depth (one end) of 50mm, with the addition of a viewable 360mm backscene to the rear and one end panel on each board.
The kit simply glues together, using a stong adhesive/PVA and you can complete these two baseboards in around 20-30 minutes, with a few additional minutes to hold it together whilst the glue starts to bond and dry.
Underneath, there are 3 supports bracing the boards with 3 small slots on each to allow the threading of any wires without the need to drill holes.
NB: These diorama baseboards are made from 3mm MDF and therfore should ONLY be used for ‘display’ purposes, i.e , a diorama or if joining multiple ones together, to be fully sat on a flush study base top. These baseboards will make an ideal starter into modelling for later progression up to a larger style baseboard.